Mason60 Specials- Pink Strokes
Mason60 Specials- Pink Strokes
Pink brush strokes. These are protoypes of the Mason60- Sakura Pink with some slight defects and off colors.
These are prototypes. What you see in the pictures is exactly what you are going to get. This exact colorway is a once-off.
The Pink Blush case has a slightly uneven top bezel. It is not noticeable by eye.
The Pink Strokes will have visible air bubbles and brush strokes. Its some what similar to the texture you see on oil paintings. Please refer to the picture with the closeup of the Pink Strokes.
The case may have slight imperfections, but it is completely fine for use! You will be purchasing the keyboard case that is shown in the photos. Since these are prototypes , there are no refunds/cancellations/returns.
• Optional EVA case foam: +$10
• Optional cork case dampener with logo: +$14
The case will be shipped out around 7 working days after order.
There are two Monochrome Mist keyboards. The keyboard naumber is shown in the photographs. Please select which one you would like.
In terms of design philosophy- I designed the shape of the Mason60 case to highlight the uniqueness of the material. I wanted a fat top bezel to show off the surface pattern and a chunky profile with very round edges which fit the "heavy" and "smooth" feel of stone or marble.
Click the link for a sound test including with and without case foam or cork dampener
The Mason60 is cast from a gypsum resin composite. Once the case is demolded and then sanded, it almost feels like marble- cold and smooth. It's heavy, impact resistant and sounds great!
• Individually hand-crafted keyboard case and wrist rest- every single item passes through my hands
• 60% style case, should fit most GH60 style PCBs (e.g. DZ60)
• Tray mount with removable screw posts and stand offs (up to 6) and M2 screws
• Silicone O-ring dampeners
• Cork liner on the bottom of the case for grip and additional dampening
• Optional EVA case foam and/or cork case dampener
Note that this product is just keyboard case. Customers will need to provide their own PCB, plate, switches and keycaps.
SHIPPING COST (USD)
|Location||Case Only||Case + Wristrest|
|Hong Kong (where we are based in)||FREE
|China, Taiwan, Macau||$5.00
|Japan, South Korea, Singapore, Malaysia, Thailand, Indonesia, Philippines||$15.00||$30.00|
|Australia, Europe, USA*, Canada||$30.00||$50.00|
No Additional shipping charges for EVA case foam or cork case dampener.
*For shipping to US Armed Forces location, please contact us. There may be additional charges subject to the location.
Customer will be responsible for all customs and duties for their country.
Case: 310x140x36mm, 1400g, front height 25mm, internal size 287x95mm (please check it fits your PCB)
Typing angle 6.5deg
Wrist rest: 310x75x26mm, 800g
There may be some small air bubbles on the surface due to the casting process. Due to the hand made nature of this product, no two pieces will be identical in terms of pattern. You are buying the exact product that is shown in the pictures. This product is sanded by hand and so the external dimensions and contours may vary slightly. It will never be as accurate as a CNC'd product, but that is part of the charm of something literally sculpted by hand!
Colors will be close to what you see in the photos (as far as one can tell from a phone or monitor).
CARE AND MAINTENANCE:
The Mason60 is sealed with beeswax and is water resistant, but please wipe off any moisture straight away to avoid leaving a mark on the wax coating. Please also keep your Cheetos away! Clean with a damp cloth and if needed you can reapply some wax (you can use Vaseline), though this shouldn't be needed for a long while.
While strong and impact resistant, it will shatter if you drop it from a height onto a hard surface. It will scratch if impacted with something sharp, but minor scratches can be sanded out.
ABOUT BRAZEN STUDIO:
We are a product design studio based in Hong Kong, specializing in creating beautiful cast objects! We are currently focused on keyboards and also offer a line of coffee accessories (pretty sure there is a sizable overlap between these interests!). As we make everything inhouse, we have more direct control over quality and timeliness vs outsourcing the manufacturing.